Skip to content
Sheikh Brothers Industries Sdn. Bhd.
SBI's plant from the air: a grey two-storey factory with a white boundary wall carrying the sign Pengilang Komponen Plastik Automotif, Sheikh Brothers Industries Sdn. Bhd.

Injection molding and assembly for automotive projects.

Machines
22
19 injection presses3 injection blowers
Clamp range
40–850
metric tonnes
Blow range
3–28
litres
Floor area
28,560
sq ft
Monthly output
±400,000
parts
Certified
ISO 9001:2015
IATF 16949 and ISO 14001 in preparation

Capabilities

What we run

Quality

How we prove it

  • Certified

    ISO 9001:2015

  • In preparation

    IATF 16949:2016

  • In preparation

    ISO 14001:2015

Quality systems and metrology →

Projects

What we make

  • A red four-door sedan.

    Perodua

    Parts made

    • A dark blue-grey rectangular bezel with one round and two square openings.
      Switch bezel
    • A pair of black tapered trim panels joined at the top.
      Side trim pair, LH / RH
    • A dark grey bracket with a wide flange and two legs.
      Mounting bracket
    • A dark blue-grey conical boot on a round flanged base.
      Steering column boot
    • A black stepped bracket with a raised tab at its centre.
      Seat rail cover
    • A black angled cover with a curved wing along one side.
      Column cover
    • A long dark blue-grey trim piece with two raised tabs.
      Seat rail trim
    • A pair of black round caps.
      Hole plugs
    • A long, flat dark blue trim panel with a notch at the top centre and two mounting holes.
      Deck trim
    • A grey square mounting plate with four studs.
      Lid combi
    • A long dark grey duct with mounting tabs along its length.
      Air duct
    • A dark blue-grey housing with a square opening in its face.
      Centre cluster panel
  • A silver four-door sedan.

    Proton

    Parts made

    • A dark grey flap cover on a strap with a hooked end.
      Tethered flap cover
    • A dark grey round plug with a raised centre.
      Hole plug
    • A dark grey bracket with a flared foot and two mounting tabs at the top.
      Defroster nozzle
    • A dark grey ribbed bellows boot.
      Bellows boot
    • A pair of dark grey caps, one shown open end up.
      Dust caps
    • A long black tether with an eyelet at one end and a ring at the other.
      Fuel cap tether
    • A white rod bent into a hook at the top.
      Washer filler neck
  • A white compact SUV with a black roof.

    Toyota / ASSB

    Parts made

    • A dark grey rounded triangular cover with an embossed mark at its centre.
      Service hole cover
    • A black rectangular plate with a raised rim and mounting holes.
      Back cover plate
    • A black open-topped bin with slots along its front.
      Storage box
    • A pink molded surround with a rectangular opening.
      Switch bezel
    • A dark rectangular frame divided into several openings.
      Air vent frame
    • A black curved duct molding with a flared outlet.
      Air duct
    • A small black upright trim cover.
      Seat rail cover
    • A small black curved trim piece with a hooked end.
      Seat belt guide

All projects →

Talk to us about a project.

  • Monday – Friday, 8:30 am – 5:30 pm
Map and directions